EFFICIENT AND LONG TERM WATERPROOF TECHNIQUES

Currently, construction works have been constructed in a more modern and professional manner. However, serious leakage still occurs regularly, affecting the lives of homeowners. Most of the buildings are currently leaking, notably the living area. This leak affects not only 1 but many apartments below. Therefore, Hung Thinh waterproofing-the leading waterproofing has been dealing with professional toilet waterproofing in Da Nang, which will help you better understand the causes and how to overcome the toilet leak phenomenon.

Causes of toilet wet:

- The previous construction did not survey, check carefully before plastering the waterproof layer.
- The staff did not follow the professional waterproofing standard process.
- Due to the substandard concrete quality, the positions such as technical boxes, wall footings are cracked ....
Why it is necessary to fix the toilet moldy situation:
Leaking toilets are a common occurrence with unsatisfactory waterproofing treatment works. Especially for apartment buildings, it will cause mass leakage because they have the same design, greatly affecting people's activities.
Waterproofing the toilet will be handled easily and quickly if we take care of it from the beginning. Once the phenomenon of spreading mold occurs, it will affect the life of the owner as well as the aesthetics of the house.

Where is the best place to waterproof the toilet:

Waterproofing Hung Thinh with a team of experienced and knowledgeable professionals provides leading bathroom waterproofing services in Da Nang at affordable prices. Ensure your toilet's anti-mold requirements.

Effective methods of waterproofing toilets:

We will share with you professional toilet waterproofing techniques for you to learn.

Materials needed:

- Reinforced glass mesh (Fiber Glass).

- Sika Latex CARD.

- High elasticity 2-component polyner cement-elastic membrane (Sika TopSeal 109, Mapei K11).

- Shrinkage grouting.

- Absorbent waterproofing solution.

Construction process:

Step 1: Clean the surface to be applied (extremely important).

- Roughen the surface with a grinder, create friction for the surface, use a strong pressure nozzle to remove yellow stains and impurities on the construction surface.

- Large cracks, cavities ... need to be punched wide and deep and then patched with a mortar with a full connection additive.

- Large cracks after cleaning and technical treatment, we use polyurethane glue to seal.

Clean the surface and chisel the pipe neck

Step 2: Punch the mouths of the pipes in the shape of the mouth of the speaker, then clean and seal the neck of the pipe.

Next, we apply Sika Latex TH oil paste mixed with cement and clean water and then pour it into the mouth of the pipe. Mix non-shrink grout and clean water poured into pipe neck.

Pipe neck waterproofing

Step 3: Plaster the slope for the base of the wall (make the base of the wall comfortable to place the glass grid).

If the base of the wall is up to the standard, then there is no need to slap.

Step 4: Start lining the wall with Sika Latex TH oil mortar with cement and water.

Measure and cut the glass mesh glued to the base and corner positions of the floor.

Step 5: Wait for the fixed glass mesh layer, we will mix Water Seal DPC with clean water at a ratio of 1:1, then sweep it evenly on the floor.

The base of the wall is swept with crystalline osmotic chemicals with the norm of 0.1 liter/m2.

Basement waterproofing

Step 6: Mix the two-component cement film.

Step 7: Apply the first coat to the entire construction surface. Particularly for the base of the wall, we need to sweep up at least 20 cm.

Membrane coating waterproof

Step 8: Wait for the first layer to dry and start scanning the second layer. We sweep so that the next layer is perpendicular to the previous layer (if the first layer is vertical, the second time is horizontal and vice versa) This helps The air bubbles are gone and the surface is evenly covered. This is the same for the 3rd scan.

Step 9: Test the water within 72 hours and conduct acceptance test.

Test water for 72 hours

You can see the instructions for waterproofing the toilet without perforating tiles in the video below:

🔔 Do not hesitate to contact us to use the "PROFESSIONAL" and "CLEAN" waterproofing services.

✨ Hung Thinh WaterProofing., Ltd
👉 Branch Office: 66 Vo Van Tan, 2nd floor, SAVICO Building, Thanh Khe District, Da Nang City
👉 Customer Care Office : 342 Hoang Van Thai, Lien Chieu District, Da Nang City
👉 Head Office : 2nd floor, SAVICO building, 66 Vo Van Tan, Thanh Khe, Da Nang

Hotline:

📲 Viettel : 098.777.4268

📲 Mobifone : 0769.18.6886

 Website: https://chongthamhungthinhdanang.com/
Youtube: Hung Thinh Waterproofing