SIMPLE AND EFFECTIVE TOILET WATERPROOF GUIDE

Post date : 09/09/2022

SIMPLE AND EFFECTIVE TOILET WATERPROOF GUIDE

Currently, construction works have been constructed in a more modern and professional manner. However, serious leakage still occurs regularly, affecting the lives of homeowners. Most of the buildings are currently leaking, notably the living area. This leak affects not only 1 but many apartments below. Therefore, Hung Thinh waterproofing-the leading waterproofing has been dealing with professional toilet waterproofing in Da Nang, which will help you better understand the causes and how to overcome the toilet leak phenomenon.

Causes of toilet mold:

- The previous construction did not survey, check carefully before plastering the waterproof layer.

- The staff did not follow the professional waterproofing standard process.

- Due to the substandard concrete quality, the positions such as technical boxes, wall footings are cracked ....

Why it is necessary to fix the toilet moldy situation:

Leaking toilets are a common occurrence with unsatisfactory waterproofing treatment works. Especially for apartment buildings, it will cause mass leakage because they have the same design, greatly affecting people's activities.

Waterproofing the toilet will be handled easily and quickly if we take care of it from the beginning. Once the phenomenon of spreading mold occurs, it will affect the life of the owner as well as the aesthetics of the house.

Where is the best place to waterproof the toilet:

Waterproofing Hung Thinh with a team of experienced and knowledgeable professionals provides leading bathroom waterproofing services in Da Nang at affordable prices. Ensure anti-mold requirements for your toilet.

Effective methods of waterproofing toilets:

We will share with you professional toilet waterproofing techniques for you to learn.

Materials needed:

- Reinforced glass mesh (Fiber Glass).

- Sika Latex TH.

- High elasticity 2-component polyner cementitious elastic membrane (Sika TopSeal 109, Mapei K11).

- Shrinkage grouting mortar.

- Absorbent waterproofing solution.

Construction process:

Step 1: Clean the surface to be applied (extremely important).

- Roughen the surface with a grinder, create friction for the surface, use a strong pressure spray nozzle to remove the yellow stains and impurities on the construction surface.

- Large cracks, hollow holes ... need to be punched wide and deep and then patched with a mortar with a full connection additive.

- Large cracks after cleaning and technical treatment, we use polyurethane glue to seal.

Step 2: Punch the mouths of the pipes in the shape of the mouth of the speaker, then clean and seal the neck of the pipe.

Next, we sweep the Sika Latex TH oil paste mixed with cement and clean water and then pour it into the mouth of the pipe. Mix non-shrink grout and clean water poured into pipe neck.

Step 3: Plaster the slope for the base of the wall (make the base of the wall comfortable to place the glass grid).

If the base of the wall is up to the standard, then there is no need to slap.

Step 4: Start lining the wall with Sika Latex TH oil mortar with cement and water.

Measure and cut the glass mesh glued to the base and corner positions of the floor.

Step 5: Wait for the fixed layer of glass mesh, we will mix Water Seal DPC with clean water at a ratio of 1:1, then sweep it evenly on the floor.

The base of the wall is swept with crystalline osmotic chemicals with the norm of 0.1 liter/m2.

Step 6: Mix the two-component cement film.

Step 7: Apply the first coat to the entire construction surface. Particularly for the base of the wall, we need to sweep up at least 20 cm.

Step 8: Wait for the first layer to dry and start scanning the second layer. We sweep so that the next layer is perpendicular to the previous layer (if the first layer is vertical, the second time is horizontal and vice versa) This helps The air bubbles are gone and the surface is evenly covered. This is the same for the 3rd scan.

Step 9: Test the water within 72 hours and conduct acceptance test.

Thank you for your trust in Hung Thinh Waterproofing and don't hesitate to contact us to solve any problem of leakage.

You can watch the toilet waterproofing instructions in the video below:

Hung Thinh Waterproofing - Waterproofing with experts.

Hotline:

📲 Viettel : 098.777.4268

📲 Mobifone : 0769.18.6886

📲 Vinaphone: 085. 924. 5081

✨ Hung Thinh WaterProofing., Ltd
👉 Branch Office: 66 Vo Van Tan, 2nd floor, SAVICO Building, Thanh Khe District, Da Nang City
👉 Customer Care Office : 342 Hoang Van Thai, Lien Chieu District, Da Nang City
👉 Head Office : Lot 15, area B3.12 Phan Ba Vanh, Son Tra, Da Nang

🌺 Website: Hung Thinh Waterproofing

🎬Youtube: Hung Thinh Waterproofing

Các tin tức khác