Post date : 08/07/2018

Currently, the construction works have been constructed in a more modern and professional manner. However, the serious leakages still happens frequently, affecting the activities of the family or the working activities of individuals and businesses. Most of the current works are leaked, notably the toilet area. It affects not only one but also many of the apartments below.

Therefore, Hung Thinh waterproofing - the leading waterproofing in Da Nang has been handling professional toilet waterproofing in Da Nang, we will help you better understand the causes and how to overcome the toilet leakage problem.

1. Causes of toilet leakages and mold:

- Previous construction did not survey, double check before plastering waterproofing layer.

- The staff did not follow the professional standard waterproofing process.

- Due to substandard concrete quality makes the location such as technical boxes, baseboards cracked, ... leading to leaks.

2. Why should overcome the situation of toilet mold?

The toilet, which is a frequent occurrence with unsatisfactory waterproof treatment facilities, is leaked. Especially for apartment buildings will cause massively leaked because they have the same design, which affects people's daily life.

Toilet waterproofing will be handled easily and quickly if we care from the beginning. Once rampant mold permeability occurs, it will affect the life of the homeowner as well as the aesthetics of the house.

3. Where is the best toilet waterproofing?

Hung Thinh waterproofing has a team of experienced, deep knowledge and expertise, we specialize in providing leading toilet waterproofing services in Da Nang with affordable prices. Ensuring the requirements of quality, prestige as well as effective waterproofing and mold for your toilet.

4. Method of effective toilet waterproofing:

We will share with you professional toilet waterproofing techniques for you to learn.
There are 2 types of toilets today:
- In the form of negative floors (pipes rise to the floor and go into technical boxes).
- Positive form (pipes passing through the floor).
Here are 2 common waterproofing methods for these two types of toilets

Please pay attention to what kind of your toilet!

4.1. Process of waterproofing toilets on positive floors:
Materials needed:

- Reinforced glass mesh (Fiber Glass)
- Sika Latex TH
- Elastic two-component polymer cement elastic membrane (FOSMIX FLX)
- Non-shrink grout
- Waterproofing solution.

Construction process:

Step 1: Clean the surface to be constructed (extremely important).
- Sanding the surface with a grinding machine, creating friction for the surface, using a high pressure hose to blow away the yellowing and impurities on the construction surface.

- Large cracks, cavities, ... need to be chiseled wide and deep then plastered with mortar mixed with additive connection.

- Large cracks after cleaning and technical treatment, we use polyurethne glue to seal.

Step 2: Flush the mouth of his neck, then clean and seal his neck.
Next, we stick Sika Latex TH oil paste mixed with cement and clean water and then pour into the mouth of the pipe so that the waterproofing layer is thick because this is the prone area for seepage.

Step 3: Plaster slope to the foot of the wall (make it easy to place the foot of the glass grid).
If the baseboard is up to standard, there is no need to plaster.

Step 4: Start lining the baseboard with Sika Latex TH oil paste with cement and water.
Proceed to measure and cut the glass mesh pasted to the footings and corners of the floor.
Step 5: Wait for the fixed glass mesh, we will mix Water Seal DPC with clean water at a ratio of 1: 1, then sweep it onto the floor.
The baseboards are swept with osmotic crystal chemicals with a norm of 0.1 liters / m2.

Step 6: Mix the 2 components of cement film evenly
Step 7: Apply the first coat on the entire construction surface. Particularly the base of the wall we need to sweep to 50 cm high.

Step 8: Wait until the first layer is dry we start scanning the second layer. We scan so that the next layer is perpendicular to the previous layer (if the first time is vertical scanning, the second time is horizontal scanning and vice versa)
This helps to eliminate air bubbles and evenly cover the surface
This is the same for the 3rd scan.
Step 9: Test the water within 24 hours and conduct acceptance and handover to customers.

4.2. The process of waterproofing negative floor toilet:

Almost the construction materials and negative floor toilet waterproofing process are the same as for positive floor toilet waterproofing. The only difference is that we will waterproof the neck through the box instead of the neck through the floor. 

The waterproofing of negative floor toilets will certainly be more complicated than the positive toilets because:
- The pipeline runs on the floor causing difficulties for surface cleaning and construction is very difficult.

-So demanding at construction time should be careful, standards.
Conclusion: With many years of experience in waterproofing and repairing a lot of Hung Thinh soundproof toilets - the leading waterproofing in Da Nang, confirms to perform waterproofing beneath concrete surface, accompanied by treatment. properly manage the neck through the box and lift up to a minimum of 50 cm above the floor.

Not only waterproofing toilets, we also waterproof for most items such as: vertical wall waterproofing, pool waterproofing, roof waterproofing, ....
Please contact us to get the best solution for your family.

Hung Thinh waterproofing - Leading waterproofing in Da Nang!
Headquarters: 342 Hoang Van Thai, Lien Chieu District, Da Nang City.
Hotline 1: 098.777.4268.
Hotline 2: 0769.18.6886.

Các tin tức khác