WATERPROOFING THE ADVERTISEMENT BETWEEN TWO HOUSES

Why is the wall slot leaking?

The space between the wall slit is small, but we can't see it. But it is large compared to the flow of water. Every time it rains, if the top is not covered, water will flow in. This is the main cause for all seepage problems. Not only for the gap in the wall between two houses.

• The space is narrow, so it is often secretive, and the water cannot escape. That means, the water will have a relatively long standing time.Covered by the walls of 2 houses, so there is no sunlight coming in.

• Therefore, the space here is always wet.

• Vietnam's weather is hot and humid, with a lot of rain, bringing a large amount of water and steam. Therefore, the adjacent wall area is always at risk of water intrusion.

Consequences of wall leaks

• The wall inside the house is soaked in water and grows moldy

• The wall is stained with water, the color is very unsightly

• Damaged electronic equipment hanging on the wall or placed close to the wall: TV, refrigerator, electric fan, etc.

• If it is a kitchen wall, it will make the air always wet and spoil the food

• Bringing many pathogens that are not good for human health

Waterproofing adjacent house openings, properly waterproofing corrugated iron roofs adjacent to walls?

• Waterproofing the junction between two adjacent houses, the corrugated iron roof adjacent to the wall is a location that is prone to leaks and damages the inner wall a lot. When building a new house, if it is not properly waterproofed, only 1.2 years the position of the adjacent joint will be damaged and must be removed for waterproofing.

• Many mistakes can be made when waterproofing adjacent houses, such as not cutting the corrugated iron slot into the wall, using plaster to connect the corrugated iron to the masonry wall, or using the wrong type of silicone glue to fill the gap between the corrugated iron and the wall. . These measures do not have long-term effects due to incorrect technical measures and application locations.

To ensure long-term effectiveness, after cutting the groove into the wall, it is necessary to fix the corrugated iron with concrete screws or nails, then glue the anti-cracking mesh, and cover it with 2 layers of outdoor waterproofing membrane (Polyurea or Polyureathane base). . In addition, the groove between the corrugated iron and the wall needs to be sealed with specialized concrete glue to completely prevent the risk of water splashing.

Hung Thinh Waterproofing - Waterproofing with experts.

Hotline:

📲 Viettel : 098.777.4268

📲 Mobifone : 0769.18.6886

 Vinaphone: 085. 924. 5081

✨ Hung Thinh WaterProofing., Ltd
👉 Branch Office: 66 Vo Van Tan, 2nd floor, SAVICO Building, Thanh Khe District, Da Nang City
👉 Customer Care Office : 342 Hoang Van Thai, Lien Chieu District, Da Nang City
👉 Head Office : Lot 15, area B3.12 Phan Ba Vanh, Son Tra, Da Nang

 Website: Hung Thinh Waterproofing

Youtube: Hung Thinh Waterproofing